Open Network and Sharing Center. Click Change adapter settings. Many times you have to use the security type to make the network functioning well and working good. The router and the computer you are using needs the same security type configuration. You can do this by simply following the instruction manual.
How to fix Wi-Fi problems on the Windows 10 October 2018 Update
A variety of software and hardware problems can cause your Wi-Fi to stop working. Use the steps and tools in this document to resolve wireless Internet connection issues. Certain troubleshooting steps require that you have access to the Internet using a wired network connection or a second computer or device.
For business computers, consult your company’s IT department or your local IT service before making any environment or security changes. For information about wireless printer setup, or if you get an error message when trying to print wirelessly, go to HP Customer Support , enter your printer model, and then search for a document about installing your wireless printer or the displayed error message.
Step 1: Check that the wireless key or button is enabled Most notebook computers have a button or keyboard key to turn the wireless signal on and off. Check the button or key status to verify if the wireless signal is on. Locate the wireless key or button.
This could be an image of an airplane or a wireless signal. Button or key Description A standalone button with an airplane. F12 key with an airplane. F12 key with wireless icon and LED. This enables or disables “wireless mode. A standalone wireless button. This is typically located above or near the keyboard. Press the button once, wait 10 seconds, and then observe any changes to the wireless connection icon in the notification area and to the LED light on the wireless button or key.
If the button or key does not have a light, hover your mouse over the wireless connection icon in the notification area of the taskbar to see the current connection status.
If the wireless signal is turned on, try connecting to the Internet again. If the wireless signal is turned off, press the button or key again to turn it back on, and then try connecting to the Internet again. Step 2: Update the wireless driver through Device Manager Downloading and installing the latest wireless LAN adapter driver can resolve common issues with the wireless Internet connection.
In Windows, search for and open Device Manager. In the Device Manager window, double-click Network adapters, right-click the name of the wireless adapter, and then select Update driver.
Click Search automatically for updated driver software. If an updated driver is found, follow the instructions to install it. Try to connect to the Internet. If the problem persists, continue to the next step. Step 3: Use automatic troubleshooting Tools by HP or Microsoft can be used to automatically test and fix a large variety of wireless conditions. If your computer does not have HP Support Assistant, use the automated troubleshooter included with Windows For computers running Windows 10 in S mode: Use HP Support Assistant network diagnostics HP Support Assistant is a software support diagnosis and troubleshooting tool from HP that can resolve many types of network and Internet connection issues.
If your computer has a wireless key or button on or near the keyboard and the wireless activity light is off or amber in color, press the key or button to enable your wireless adapter. This key might be the F10 key, the F12 key, or a key labeled with a symbol of an airplane. If wireless activity comes on or the activity light turns blue, you have enabled wireless on your system. Try connecting to the Internet again.
If problems persist, continue using these steps. If your computer does not have a wireless key or the wireless activity light remains off or orange, continue using these steps. In Windows, search for and open HP Support Assistant, and then click your device from the devices listed in the My devices tab.
If your computer cannot connect to the Internet, go to Using Windows Network and Internet Troubleshooter in this document. On the My Devices tab, select the device you are using, and then click Troubleshooting and fixes. If a User Account Control message opens, click Yes. If the diagnostic test finds no issues, close the windows, and then go to Using Windows Network and Internet Troubleshooter in this document.
If the diagnostic test finds one or more issues, continue using these steps. Expand Possible Root Causes, if necessary. Click one of the listed possible causes, click one of the tool icons for steps to resolve the issue, and then follow the on-screen instructions. After completing the instructions, click Re-check. HP Support Assistant checks the network connectivity.
If necessary, repeat these steps until the network connectivity issue is resolved or all possible root causes and repairs have completed. Use Windows Network and Internet Troubleshooter The Windows Network and Internet Troubleshooter tests the network for problems and attempts automatic repairs for any issues found.
Use this Windows tool to test and repair the connection. If your computer does not have a wireless key or the wireless activity lights remain off or orange, continue using these steps.
In Windows, right-click the network connection icon in the system tray, and then select Troubleshoot problems. The Windows Network Diagnostic window opens and the troubleshooting process begins. After automated troubleshooting completes, read the information on the screen. This information might describe problems found, what was fixed, or actions you can take to resolve the problems.
If problems were found and actions are suggested, perform the suggested actions. If problems persist, close the troubleshooting window and continue to the next step. If no problems were found and the issue still persists, close the troubleshooting window and continue to the next step. Step 4: Check and reset hardware Resetting the hardware on your wireless network in the proper sequence can resolve a variety of connection and performance problems.
Turn off your PC. If your network includes a separate broadband modem, disconnect the power cord from the broadband modem. Wait at least 5 seconds, and then connect the power cord to the wireless router and the broadband modem, if separate. Wait until all lights come on and reflect normal Internet and PC activity.
If the lights on the broadband modem indicate a problem, refer to the following list of options for help. If all lights are off after reconnecting the power, check the power source by plugging the power cord into another power outlet. Service or replace your broadband modem if it cannot be turned on. If only the power light is on and the remaining activity lights are off or show no activity, a network connection is not being detected.
Make sure the cable carrying the Internet signal is connected to the broadband device. Make sure Internet cables coming into your residence have not been damaged or disconnected. You might need to contact your Internet service provider if other people in your area are also experiencing Internet outages.
If the Internet or Online light consistently blinks and does not indicate an online connection is available, the problem likely resides with your Internet service provider.
Either wait until service is restored or contact your Internet service provider for further assistance. Turn on your computer and wait until Windows opens.
Wait until Windows automatically connects to your wireless Internet network. If Windows does not automatically connect, click the wireless connection icon in the notification area on the taskbar, and then select the name of your wireless network, and then click Connect. A window might open prompting you for a password or push button connect actions depending on the type of security you are using. Step 5: Reinstall the wireless network adapter driver using Device Manager Removing and reinstalling the wireless network adapter driver can clear registry values and reset configurations so the driver can be properly set up and accessed by Windows.
Use Windows Device Manager to uninstall the wireless adapter and have Windows reinstall the driver. If you are using an external USB wireless network adapter or cellular broadband device, unplug it, restart your computer, and then plug it into a different USB port after Windows opens. Double-click Network adapters. Right-click the name of your wireless network adapter, and then select Uninstall device.
If the name of the network adapter is missing from the network adapters category, the network adapter hardware is not connected or the device driver cannot Plug and Play. If this happens, shut down the computer and check the hardware connection to your wireless adapter hardware. Service the computer if problems are found. When the Uninstall Device screen displays, select Delete the driver software for this device if it displays, and then click Uninstall. After the network adapter uninstalls, the name of the wireless adapter no longer appears in the network adapters category.
In the Device Manager window, make sure Network adapters is highlighted. In the Device Manager main menu, click Action, and then select Scan for hardware changes. The computer reinstalls the wireless network, and the wireless network adapter name displays in the Network adapters category. After the network adapter name displays in Device Manager, close Device Manager and restart the computer.
Step 6: Update wireless network drivers Downloading and installing the latest driver for your wireless adapter can resolve issues with wireless Internet connections, especially issues related to performance or intermittent dropped connections. Use one or more of the following sections to find updated drivers for your wireless networking hardware.
If you cannot find an updated driver or the updated driver does not solve the problem, continue to the next step. Use Device Manager or Windows Update to check for updated software and drivers.
Here are some solutions to try if you don’t see your wireless network in Surface can’t find my wireless network Get help for Surface running Windows . Xbox One S · VR & mixed reality · Windows 10 apps · Office apps. If your computer can connect to the previous WiFi networks automatically, but there are . I am also having this issue where I cannot find or connect to any wifi .
VIDEO: Windows 10 Can T Find Wifi
If you can’t find it, click the white circle to the right of the Windows Start button. Windows 10 taskbar, shortened. The Cortana search box is highlighted. Windows 10 Wi-Fi Problem: No Wireless Internet Connection and No Wi-Fi after Windows 10 Update Can’t turn on WiFi after Windows 10 update. . Run Driver Talent and click the Scan button to detect your computer. It can.